Ross RCS-8120, Руководство пользователя

Страница: 13 / 20

In-desk DCA-8120 Installation
To mount the DCA-8120, use the dimensions on the following figure to make your cutout in the
desktop. Note the figure is not to scale.
Figure 3. DCA-8120 In Desk Mounting Template.
1. Using the measurements supplied in the figure above, drill, cut, and finish the
appropriate holes for the DCA-8120 installation.
2. Using a ¼” nut driver, unscrew the four corner hex nuts which hold the PCB to the
module.
3. Remove the PCB assembly from the module cover plate.
4. Install the module cover plate in the DCA-8120.
5. Install the RCM module in the DCA-8120.
6. Using a ¼” nut driver, install the four corner hex nuts to the bolts at the back of the
module.
7. Install the DCA-8120 into the desk cut out.
RCS-8120 User Manual (Iss. 01A) Installation and Setup
•
2-3