•
Use a face mask/respirator and protective clothing when spraying or degreasing. Always use tools in a well
ventilated area to prevent health and fire hazards.
•
When spraying and or cleaning, always follow the instructions and safety precautions provided by the
material manufacturer
•
Never spray closer than 8 metres 25 feet to the compressor!
•
If possible, locate compressor in separate room. Never spray into the compressor, compressor controls or
the motor.
•
Do not smoke or eat when spraying paint, or other flammable substances.
•
Do not spray flammable materials in vicinity of open flame or near ignition sources. Motors, electrical equip-
ment and controls can cause electrical arcs that will ignite a flammable gas or vapor. Never store flammable
liquids or gases in the vicinity of the compressor.
•
Do not spray acids, corrosive materials, toxic chemicals, fertilizers or pesticides. Using these materials could
result in death or serious injury.
•
Always work in a clean environment. To avoid injury and damage to the work piece.
•
Do not aim the air tools at your self or any other person or pet.
•
Do not use pressure that exceeds the operating pressure of any of the parts (hoses, fittings, etc.)
•
Always use a pressure regulator on the air supply to the spray gun.
•
Only use clean dry compresses air for spay painting
•
Keep hose away from sharp objects. Bursting air hoses may cause injury. Examine air hoses regularly and
replace if damaged.
•
Keep visitors away and NEVER allow children or pets in the work area.
GENERAL WARNINGS!:
SPRAY GUN
Nozzel : 1.5mm
Air Pressure: 3~4 bar (5 ~55 PSI)
Air Consumption 141l/Min@ 2.75bar (5CFM @40psi)
Nitto style plug.
WARNING!:
Use a face mask/respirator and protective clothing when spraying
Air fitting may differ from those shown above