Ross QRA-8808, Руководство пользователя

Страница: 21 / 32

QRA-8808 User Guide (v5.0) Software Upgrades • 21
Software Upgrades
The QRA-8808 can be upgraded in the field via the Network Controller Card in your openGear frame. Note that
DashBoard version 6.2.0 or higher is required.
To upgrade the software on a card
1. Contact Ross Technical Support for the latest software version file.
2. Display the Device View of the card by double-clicking its status indicator in the Basic Tree View .
3. From the Device View , click
Upload
to display the Select file for upload dialog.
4. Navigate to the *.bin upload file you wish to upload.
5. Click
Open
.
6. If you are upgrading a single card, click
Finish
to display the Uploading to Selected Devices dialog. Proceed
to 8
7. If you are upgrading multiple cards:
• Click
Next >
to display the Select Destination menu. This menu provides a list of the compatible cards
based on the card selected in 2
• Specify the card(s) to upload the file to by selecting the check box(es) for the cards you wish to upload the
file to.
• Verify that the card(s) you wish to upload the file to. The Error/Warning fields indicate any errors, such as
incompatible software or card type mismatch.
• Click
Finish
to display the Uploading to Selected Devices dialog.
8. Monitor the upgrade.
• The Uploading to Selected Devices dialog enables you to monitor the upgrade process.
• Click
OK
to complete the upgrade.
• The card(s) are temporarily taken off-line during the re-boot process. The process is complete once the status
indicators for the Card State and Connection fields return to their previous status.