Ross OpenGear HDC-8223A, Руководство пользователя

Страница: 37 / 80

HDC-8223A(-S) User Manual (Iss. 03) Operation • 4–13
• If the Text Box Size is set to Custom , use the Text Box Width , and Text Box
Height sliders to adjust the dimensions of the overlay.
• Use the Horizontal Padding and Vertical Padding sliders to nudge the overlay
position along the x or y axis respectively.
7.
Use the Position Mode to specify where on the display to anchor the overlay text box.
• If you set the Position Mode to a Custom option, use the Horizontal and Vertical
Position sliders to specify a location for the overlay on the display.
8.
Use the Background Color , and Background Opacity fields to configure a background
to the overlay.
9.
Use the Border menu to add a border to the overlay. Note that the border color is
determined by the Character Color setting.
10.
Click
Update
to apply your settings.
11.
Repeat steps 2 to 10 for Ident 2 if you wish to configure a second text overlay.
Adding a Timecode Overlay
A timecode overlay displays the timecode data as reported by the output video signal. You can
still customize the timecode format and appearance, add a background, and position the overlay
anywhere on the active picture area.
For More Information on...
• the menus and parameters available in the Timecode Burn sub-tab, refer to the section
“ Timecode Burn Tab ” on page 5-22.
To add a timecode overlay
1.
Select the Character Burner tab.
2.
Select the Timecode Burn sub-tab located at the bottom of the Character Burner tab.
Character Burner — Timecode Burn Tab
3. From the Overlay menu, select one of the following:
• Always enabled — The timecode overlay always displays on the output.