Ross openGear DRA-8804, Руководство пользователя

Страница: 27 / 40

DRA-8804 User Manual (Iss. 04) Configuration • 3–7
To bypass the reclocker
1. From the Device View , select the Setup tab.
2. Select the Enable Reclocker box for the channel to clear the box contents.
Loss of Input
When enabled, this feature will indicate an alarm condition (red) in the Channel Status field of
the Signal tab. This occurs if the DRA-8804 does not detect a valid input signal for that channel.
To verify which BNC to troubleshoot, refer to the rear module labeling or the Input BNC status
field in the Setup tab.
To enable an alarm for a loss of input
1.
From the Device View , select the Alarms tab.
2.
Select the Alarm on Loss of Input box for the channel. The box displays a check-mark.
Note
— You must bypass the reclocker when using DVB-ASI or SMPTE 310 signals.