Ross NK-RP1 Series, Руководство пользователя

Страница: 17 / 28

NK-RP1 Series User Guide (v2.0) Physical Installation • 17
• NK-IPS Network Bridge
• NK-VRC Virtual Routing Core
• NK-3RD Third Party Interface
• NK-JBX Geneos RCP Interface
• RCP-NKM and RCP-NKQ Remote Control Panels
Ross NK Devices with a Neutrik® speakON® Connector
The NK-S12/P has a Phoenix connector on one end to connect to the NK-RP1/P or NK-RP1/PN, and a Neutrik®
speakON® connector on the other to connect to a 3RU 64x64 or 72x72 router.
Figure 3.3 NK-S12/P Cable with a Neutrik® speakON® Connector
The following routers use the Neutrik speakON connector for power:
• All NK-64 routers
• All NK-72 routers
Connecting the NK-RP1 Series to a Ross Router or NK Device

You can connect up to four NK-D12/PN or NK-S12/P cables to the NK-RP1/P or NK-RP1/PN to provide
redundant power to up to four Ross NK routers or devices.
To connect the NK-D12/PN cable and NK-S12/P cable
1. Connect the Phoenix connector of the NK-D12/PN or NK-S12/P cable to the NK-RP1.
2. Tighten the two screws on the sides of the Phoenix connector to secure the cable connection.
Figure 3.4 NK-RP1 Series Rear Panel — Phoenix Connector
3. Connect the other end of the NK-D12/PN or NK-S12/P cable to the router or device.
To router or device
Screw Screw