Ross NK-IPS Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 42

Ross NK-IPS Скачать руководство пользователя страница 41

NK-IPS User Guide (v5.0)

DashBoard Interface Overview • 41

Configure IPS Interface

summarizes the columns and fields displayed in the Configure IPS interface.

Table 8.3 NK Switchboard Interface — Right Toolbar

Item

Parameters

Description

Virtual
Routing

a

a.

The NK-VRC is required for virtual routing and resource management.

Press the Virtual Routing button to have the NK Switchboard
perform all switches in virtual routing mode.

If de-selected, any routing devices controlled through NK
Switchboard will use physical switching.

Functions

MC

Provides Machine Control switching; must be enabled from the
Configure IPS dialog

Protect

Protects selected inputs/outputs; must be enabled from the
Configure IPS dialog

Levels

#

When selected, enable switching on the corresponding levels.
The total number of Level buttons shown is reliant on the
number entered in the Configure IPS dialog

Input

#

Selects the source(s) to be switched on the levels previously
selected. The total number of Input buttons shown is reliant on
the number entered in the Configure IPS dialog.

Output

#

Selects the destination for the source to be switched on the levels
previously selected. The total number of Output buttons shown
is reliant on the number entered in the Configure IPS dialog.

Table 8.4 Configure IPS Interface

Item

Parameters

Description

Custom

Selected

Saves the custom settings when saving the setup to an *.nks file.
Any changes to the settings of an NK-IPS in the Configure IPS
dialog will automatically select this box.

Cleared

The change in settings are not captured when saving to an *.nks
file.

Serial

#

This read-only field reports the serial number assigned to the
specified device.

Name

<text>

Provides an unique identifier for the specified device.

#Outs

#

Specifies the maximum number of destinations for the device.

#Ins

#

Specifies the maximum number of sources for the device.

#Levs

#

Specifies the maximum number of levels for the device.

Addr

#

Assigns a Switchboard T-Bus address to the device. By default,
the NK Switchboard T-Bus address is the same as the NK-IPS
T-Bus address.

Prot

Selected

Enables the Protect function for the device

Cleared

Disables the Protect function for the device

«
...
39
40
41
42
»

Содержание NK-IPS











































Отзывы:

Нет отзывов