Ross NK-3RD, Руководство пользователя

Страница: 21 / 26

NK-3RD User Guide (v04) Setting Up the NK-3RD • 21
Configuring the NK-3RD
The NK-3RD configuration should be reviewed and set as required before use.
To change the configuration on the NK-3RD
1. Locate the Configuration area in the NK-3RD DashBoard interface.
2. Use the Protocol menu to select the type of protocol for the third-party control system to use to control the NK
Series routing switcher system via the NK-3RD. Choose from the following:
• Probel SW-P-08
• Probel SW-P-02
• Jupiter ESswitch
• GVG Native
3. If an NK-VRC is used in the routing system, select the Virtual Routing Enabled box.
4. Use the Matrix Number field when the Protocol is set to Probel SW-P-08 . This protocol allows up to 16
matrices (0 to 15) to be connected. The Matrix Number value selects which matrix number this NK-3RD will
be responding to. By default this is set to 0 . This value should correspond to the setting in the third-party
device.
5. Use the Baud Rate menu to select either 19200 or 38400 baud for the serial communications. The default is
38400.
6. If you are using the Probel SW-P-02 protocol, select the level of the NK system to be controlled.
7. Click
Send Configuration
.
The Send Config to NK Device window opens.
8. Click
Send
.
9. Click
Refresh
to refresh the data and verify that the configuration was loaded to the device.
If configuration items have changed, the device will reset.