Ross NK-3G144, Руководство пользователя, Страница: 40 / 64

40 • Setting up a Routing Switcher NK-3G144 User Guide (v04)
7. Send the current file to the device (see “ Sending a Configuration File to a Device ” on page 47).

If you click and drag across the squares, you can quickly enable or disable reclocking.
Setting Up Input and Output Offsets
If you are using several routing switchers across the same router level, you can offset the input and output ranges of
each routing switcher so that each can be addressed as required. This is done by assigning the first input and first
output for the routing switcher via DashBoard.
You can offset routing switchers:
• with independent inputs and outputs (see Figure 5.2 )
• with overlapping inputs and outputs (see Figure 5.3 )
• with common inputs and parallel outputs (see Figure 5.4 )
Figure 5.2 Offsetting two routing switchers for independent inputs and outputs