Ross nielsen NWE-IP, Руководство пользователя, Страница: 43 / 80

NWE-IP User Guide (v5.0) Configuring the AES67 Receiver • 43
Routing a Network Stream Group to a Watermark Encoder Channel
To route the audio streams, you must first select a Watermark Encoder channel then a network stream group. Keep
in mind that routing occurs automatically after a Stream Group button is selected.

The number of available Watermark Encoder channels depends on the number of encoder channels configured
for your NWE-IP. Refer to the section “ Configuring a Watermark Encoder Channel ” on page 46 for details.
To select a Watermark Encoder channel
1. Display the AES67 Receiver interface in DashBoard as outlined in “ To display the NWE-IP interfaces in
DashBoard ” on page 29.
2. Select the Connections tab.
3. In the Output Name row of the Outputs area, locate the button for the Watermark Encoder channel you wish
to allocate the Network Stream Group to.
4. Click the required
Watermark
button.
To allocate a Network Stream Group to a Watermark Encoder channel
1. In the Stream Groups area, locate the button for the Network Stream group you wish to route to the selected
watermark encoder.
 Each button represents a Network Stream Group configured in “ Creating Network Stream Groups for the
AES67 Receiver ” on page 40.
2. Click the required
Stream Group
button to perform the switch.
The selected Network Stream Group is now allocated as the source for the Watermark Encoder channel.