Ross nielsen NWE-IP, Руководство пользователя, Страница: 41 / 80

NWE-IP User Guide (v5.0) Configuring the AES67 Receiver • 41
2. If your upstream network device supports the Session Description Protocol (SDP), create a session for it as
follows:
a. Copy the settings of the upstream device by opening its *.sdp file and copying the settings to the clipboard
function of your PC.
b. Return to the Network Streams tab in DashBoard for the NWE-IP.
c. Click
Paste SDP To
.
d. From the drop-down menu next to the
Paste SDP To
button, select the specified session to copy the SDP
settings to.
e. Continue to step 10.
3. Locate the row for the stream you wish to configure.
4. Use the
Name field to assign a unique name to the audio stream.
5. Use the Transport IP field to specify the Multicast IP Address for the audio stream.
 Only multicast IP Address of 239.x.x.x and 232.x.x.x can be received by the NWE-IP. Contact Ross Technical
Support if you need additional IP ranges.
6. Use the Port field to specify the RTP port for the audio stream.
7. Use the # Channel field to specify the maximum number of audio channels in this stream.
8. Use the Link Offset field to adjust the relative position of the audio start position as an offset to the reference.
9. Repeat steps 3 to 8 for each audio stream you wish to define.
10. Click
Save
to update save your changes and update the list in the Network Streams tab.
Mapping the Audio Channels to the AES67 Receiver
When defining a network stream group, you can choose to apply the default audio channel map or assign the
channels as required by your system.
To apply the default audio map to the network stream group
1. Display the AES67 Receiver interface in DashBoard as outlined in “ To display the NWE-IP interfaces in
DashBoard ” on page 29.
2. Select the Network Streams tab.
3. Use the Target Type menu to specify the type of audio channels that will be assigned to the network stream
group.
4. Click
Default
.
The Audio Channel Map table updates to display the default settings for the audio type selected.
5. Click
Apply
to save your settings.
To customize the stereo audio channels assigned to a network stream
1. Display the AES67 Receiver interface in DashBoard as outlined in “ To display the NWE-IP interfaces in
DashBoard ” on page 29.
2. Select the Network Streams tab.
3. Select Stereo from the Target Type menu.
The Audio Channel Map table updates to display rows for the Left and Right in the Output Channel column.