Ross nielsen NWE-IP, Руководство пользователя, Страница: 11 / 80

NWE-IP User Guide (v5.0) Introduction • 11
Introduction
This guide covers the installation, configuration, and use of the NWE-IP. The following chapters are included:
• “
Introduction ” summarizes the guide and provides important terms, and conventions.
• “ Before You Begin ” summarizes the features of the NWE-IP.
• “ Integration Example ” provides a possible implementation of the NWE-IP in a facility work-flow.
• “ Hardware Overview ” presents information on the NWE-IP hardware.
• “ Physical Installation ” provides additional information for installing the NWE-IP, and DashBoard before you
can proceed to cabling and configuring your NWE-IP.
• “ Cabling ” outlines how to connect to your facility network. Information is also given about connecting
peripheral devices you will need for initial setup.
• “ Initial Connection ” provides instructions for configuring the initial IP address for the NWE-IP.
• “ Using DashBoard ” provides instructions for launching DashBoard, and accessing the NWE-IP interfaces in
DashBoard.
• “ Updating the Network Settings ” provides instructions for configuring the RJ45 ports of the NWE-IP for
communication with your facility network and streaming devices.
• “ Configuring the PTP Settings ” provides instructions for configuring the NWE-IP to use Precision Time
Protocol, and specifying a system clock reference source.
• “ Configuring the AES67 Receiver ” outlines the steps required to configuring the AES67 receiver streams on
the NWE-IP.
• “ Enabling the Watermark Encoders ” outlines the steps required to configuring and enabling up to four
watermark encoder channels.
• “ Configuring the AES67 Senders ” outlines the steps required to configuring the AES67 sender streams on the
NWE-IP.
• “ Third-Party Protocols ” summarizes how the NWE-IP implements third-party protocols such as Ember+.
• “ Upgrading the Software ” provides instructions on how to upgrade the NWE-IP software via DashBoard.
• “ DashBoard Interface Overview ” summarizes the menus and parameters of the NWE-IP tabs in DashBoard.
• “ Technical Specifications ” provides the specifications for the NWE-IP.
• “ Service Information ” provides information on the warranty and repair policy for your NWE-IP.
• “ Glossary ”provides a list of terms used throughout this guide.
Related Publications
It is recommended to consult the following Ross documentation before installing and configuring your NWE-IP:
•
DashBoard User Manual , Ross Part Number: 8351DR-004
• NWE-IP Quick Start Guide , Ross Part Number: NWEIPDR-002
Documentation Conventions
Special text formats are used in this guide to identify parts of the user interface, text that a user must enter, or a
sequence of menus and sub-menus that must be followed to reach a particular command.
Interface Elements
Bold text is used to identify a user interface element such as a dialog box, menu item, or button. For example:
In the Network tab, click
Apply
.