Ross MUX-8552A, Руководство пользователя, Страница: 16 / 32

2-4
•
Installation and Setup MUX-8552A User Manual (Iss. 01)
Analog Cables
On the CON-8552 adapter, there are removable connectors for sockets Analog Audio IN- 1A, 1B, 2A,
and 2B. Each connector has sockets for the positive, negative, and grounded wires of a balanced
analog audio cable.
Wire the external cables to the terminal block connectors as outlined in the diagram and procedure
below.
Figure 4. Connector Wiring for CON-8552 Input Sockets
Use the following procedure to wire the external cables to the terminal block connectors:
1. Insert an analog audio wire to the designated polarity slot on the connector.
2. Use a tweaker screwdriver to tighten the corresponding screw on the underside of
the connector.
3. Repeat steps 1 and 2 for each wire on each connector.
Once the cables have been wired to the connectors, install the connectors to the sockets on the CON-
8552 adapter so that the slotted tongue fits in the grooves on the adapter socket.