Ross MB-652, Руководство пользователя, Страница: 8 / 42

1–2 • Introduction MB-652 User Manual (Iss. 04)
Overview
Each MB-652 is a compact 3G/HD/SD SDI embedded audio monitoring system designed to
extract up to 16 channels of embedded audio from an SDI signal for visual and aural monitoring.
The Monitoring Bridge features an intuitive user interface to allow for easy access to the signals
and information you need to monitor.
A large vacuum fluorescent display on the front panel reports VU/PPM information, LKFS
ITU1770-3/1771 loudness measurements, and true peak measurement. Input signal format data
and mode selection information is also displayed.
Located directly beneath the display are 12 illuminated push-buttons to provide intuitive channel
source and mode selection.
Also located on the front panel is a push to mute rotary shaft encoder for volume control and a
1/4” long-frame jack for headset monitoring.
High quality full range speakers and a Class D amplifier provide unparalleled performance.
One 3G/HD/SD SDI signal can be connected to the BNC on the rear panel while a reclocked
output is available. Two 3-pin terminal block connectors also provide a stereo monitor output.
Features
The following features come standard on the MB-652:
• One 3G/HD/SD SDI input
• One reclocked SDI output
• One stereo monitor output
• Left, Right, SUM, Left Total/Right Total (Lt/Rt) downmix modes
• Push to Mute rotary shaft encoder
• High quality 1/4” long-frame headset jack
• 16 VU/PPM bar graph meters
• Provides ITU 1770-3/1771 LKFS measurements
• Full range speakers
• Class D power amplifier