Ross MB-651, Руководство пользователя, Страница: 10 / 42

1–4 • Introduction MB-651 User Manual (Iss. 04)
User Interfaces
The MB-651 is intended to be controlled via the DashBoard client software, as well as through
the physical controls on the panel.
DashBoard Control System
The DashBoard client software enables you to monitor and configure the Monitoring Bridge from
a computer. The DashBoard software is available for download from our website.
The MB-651 includes two DashBoard interfaces: Network Connect and MB-651. Both interfaces
are accessed by expanding the Monitoring Bridge node in the DashBoard Tree View and selecting
the appropriate sub-node. The Network Connect interface enables you to set up ethernet
communications, and monitor those communications. The Monitoring Bridge interface includes
operational controls for the physical panel such as selecting the input source for the speakers and
adjusting the volume level for the speakers.
For More Information on...
• configuring the Monitoring Bridge for network communication, refer to the section
“ Network Configuration ” on page 3-6.
• menus in DashBoard for the Monitoring Bridge, refer to the chapter “ DashBoard
Menus ” on page 4-1.
• installing and using DashBoard, refer to the DashBoard User Manual .
Controls on the Physical Panel
The front panel of the MB-651 provides the ability to monitor the LKFS and true peak values, the
input signal format, and meters that represent VU/PPM data and loudness measurements. Buttons
are provided to routing audio sources to the speakers, selecting the operating mode, and volume
control.
The rear panel provides connections for the power supply, BNCs for the SDI input and output,
and two 3-pin blocks for monitoring the analog audio.
For More Information on...
• the control and monitoring features of the front panel, refer to the section “ Front Panel
Overview ” on page 2-3.
• the connections provided on the rear panel, refer to the section “ Rear Panel Overview ”
on page 2-4.