Ross Master Control MC1-PANEL-16, Руководство пользователя, Страница: 47 / 58

MC1-PANEL-16 User Guide (v4.0) DashBoard Menus • 47
DashBoard Menus
This chapter briefly summarizes the menus, items, and parameters available in the MC1-PANEL-16 Configuration
interface. Default values are noted with an asterisk (*).

Before proceeding, ensure that you are running DashBoard software version 6.2.0 or higher. The DashBoard
software and user manual are available to download from the Ross Video website.
Status Tabs
This section summarizes the read-only information displayed in the Status tabs. The fields in the Status tabs vary in
severity from green (valid), yellow (caution), to red (alarm). DashBoard reports the most severe alarm for a single
field. Alarm colors are noted within the tables as text set in brackets next to the menu parameter name.
Hardware Tab
Table 8.1 summarizes the read-only information displayed in the Hardware tab.
Table 8.1 Hardware Tab Items
Item Parameters Description
Panel Status OK (Green) Normal operation; no hardware errors and the correct
rear module is installed
Alarm suppressed
(Green) The PSU# Voltage Out of Range alarm(s) is not
selected in the Alarm Enable tab. Refer to
Table 8.6 .
PSU# voltage out
of range (Red) The PSU# Voltage Out of Range alarm(s) is selected in
the Alarm Enable tab and the indicated power supply
unit is experiencing an input voltage that is not within
the acceptable range
No active
connection to
MC1-MK (Red) The MC1-PANEL-16 is not communicating with an
MC1-MK card assigned to a channel on the
MC1-PANEL-16
PSU# Voltage (V) # Measured input voltage
Current (mA) # Current consumption of card in milliamperes
Power (W) # Calculated power of the card
Processor Temp ##C / ##F Indicates the processor core temperature.
CPU Usage x.xx/y.yy/z.zz CPU Load average where:
•
x.xx represents in the last minute
• y.yy represents the last five minutes
• z.zz is the last fifteen minutes.
RAM Available #/## CPU Memory Used / Total CPU Memory