Ross GearLite SRA-9601, Руководство пользователя

Страница: 15 / 24

SRA-9601 User Guide (v3.0) Physical Installation • 15
Physical Installation
If you have questions pertaining to the installation of SRA-9601, please contact us at the numbers listed in the
section
“Contacting Technical Support ” on page 7. Our technical staff is always available for consultation,
training, or service.
For More Information on...
• the technical specifications for the SRA-9601, refer to the chapter “ Technical Specifications ” on page 23.
Static Discharge
Throughout this chapter, please heed the following cautionary note:
Mounting and Installation
The SRA-9601 can be mounted in any convenient location. However, to ensure long life for this product, observe
the following precautions and operating requirements:
• Maintain an ambient temperature of 20° to 40°C (68°F – 104°F).
• Allow for air circulation around the chassis for convectional cooling.
Many different mounting positions are possible with the included mounting hardware. Some installation options are
permanent and require careful consideration of the final positioning before installation.

In some mounting locations, the power adapter must be affixed in a similar manner as the chassis.
Other possible options include the use of adhesive magnetic sheets (not included) affixed to the chassis and the
power adapter, for removable mounting on metal cabinets etc.
Cable ties may be necessary in some applications to relieve strain on the mounting hardware and the connectors.
Surface Mount Strips
The included VELCRO® brand surface mount strips allow the GearLite module and power supply to be affixed to
a permanent location during use and easily removed for adjustments. Carefully consider the installation location
before proceeding; the adhesive is very aggressive and is not easily removed. The adhesive will cure fully in 24
hours.
To install the Surface Mount Strips
1. Remove the Protective Backing Film from the adhesive on the bottom of the two VELCRO® brand Surface
Mount Strips .

A third VELCRO® brand Surface Mount Strip is available to mount the power adapter.
2. Adhere the Surface Mount Strips to the bottom side of the chassis Figure 4.1 .
ESD Susceptibility
— Static discharge can cause serious damage to sensitive semiconductor
devices. Avoid handling circuit boards in high static environments such as carpeted areas and when
synthetic fiber clothing is worn. Always exercise proper grounding precautions when working on circuit
boards and related equipment.