Ross DFR-8104A, Руководство пользователя, Страница: 24 / 28

4–2 • Specifications DFR-8104A(-C) User Manual (Iss. 03)
Technical Specifications
This section provides the technical specifications for the DFR-8104A(-C).
Important Notes
• The power requirement of each product installed in this frame is indicated in the
Specifications section of the documentation provided with each card.
• For long-term reliability and increased product life, it is recommended that the total
dissipation of all modules installed in a frame should not exceed 16W total without the
CFM-8104A, and 40W total with the CFM-8104A.
• Frames without the CFM-8104A should be provided with one rack unit of empty space
above and below each frame for ventilation. Refer to the section “ Ventilation and
Cooling ” on page 2-4 for details on higher load applications requiring greater heat
dissipation.
Table 4.1 DFR-8104A(-C) Technical Specifications
Category Parameter Specification
Power Supply
Input Voltage 100-240VAC, 50-60Hz
Input Power (1RU DFR-8104A) 75W
Output Voltage +6.7V, -6.7V
Output Current The sum of both outputs not to exceed 13A
Line Regulation change-over full input
range
<+/-250mV
Output Ripple <60mV p-p (1.8%)
For safety reasons, Ross Video power supplies do not fit into rack frames of other manufacturers.
Rack Frame
Mechanical
Height 1.75" (45mm)
Width 19" (483mm)
Depth 13" (330mm)
Weight, with 4 cards installed approximately 7.9lbs (3.58kg)
Frame Card
Slots
Number of Slots 4
Total Frame Card Power
40W, total card power. Consumption not to exceed 10W
maximum per card slot.
Environmental
Ambient temperature range 0°C to 35°C
Humidity, non-condensing <95%
Total Module
Power
1RU Frame non-ventilated (DFR-8104A) 16W
1RU Frame ventilated (DFR-8104A-C) 40W