2-4
•
Installation and Setup
ADC-8432 User Manual (Iss. 01)
Cable Connections
This section provides information for connecting cables to the installed Rear Modules of your DFR-
8300 series frame backplane.
Connections for the DFR-8310 Series Frames
In the DFR-8310 series frames, the ADC-8432 occupies one slot and provides 4 outputs. Connect the
input and output cables as follows:
•
R1-8432 Rear Module
— Each card occupies one slot and provides one 75
Ω
AES/EBU
external reference input, four 75
Ω
AES/EBU outputs on BNC connectors, and one stereo
analog audio input on 3-pin Weco™ block connectors. Refer to
Figure 4
for cable
connections.
•
R1A-8432 Rear Module
— Each card occupies one slot and provides one 110
Ω
AES/EBU external reference input, four 110
Ω
AES/EBU outputs on WECO connectors,
and one stereo analog audio input on 3-pin Weco block connectors. Refer to
Figure 5
for
cable connections.
Figure 4. Cable Connections for the R1-8432 and R2-
8432 Rear Modules
Figure 5. Cable Connections for the R1A-8432 and the
R2A-8432 Rear Modules
Connections for the DFR-8320 Series Frames
In the DFR-8320 series frames, connect the input and output cables as follows:
•
R2-8432 Rear Module
— Each card occupies two slots and provides one 75
Ω
AES/EBU external reference input, four 75
Ω
AES/EBU outputs on BNC connectors, and
one stereo analog audio input on 3-pin Weco block connectors. Refer to
Figure 4
for
cable connections.
•
R2A-8432 Rear Module
— Each card occupies two slots and provides one 110
Ω
AES/EBU external reference input, four 110
Ω
AES/EBU outputs on BNC connectors,
and one stereo analog audio input on 3-pin Weco block connectors. Refer to
Figure 5
for
cable connections.