Ross ADA-8504, Руководство пользователя

Страница: 14 / 28

JP4 Fault Report
JP5 Input Select JP6 BNC 7 Select
Figure 2. Jumper Locations
Channel Mode Setup
JP5 and JP6 configure the function of the card to operate as a single or dual channel amplifier. Use
Figure 2, the card labeling, and the following discussion to set up the card.
Dual Channel
Set JP5 and JP6 as follows:
•
JP5 — IN2 (default setting).
•
JP6
— IN2 (default setting).
Single Channel
Set JP5 and JP6 as follows:
•
JP5
— IN1
•
JP6 — OUT
Fault Report Jumper Setup
Use Figure 2, the card labeling, and the following discussion to enable or disable SMPTE 269M Fault
Reporting.
Select SMPTE 269M Fault Reporting, EN ABLED or DIS ABLED, via JP4 The default is EN .
See Chapter 3, “ SMPTE 269M Fault Reporting ” for details on fault reporting.
2-2
•
Installation and Setup ADA-8504 User Manual (Iss. 03)