2 • Crosspoint Module Installation Guide
Crosspoint Module Installation Guide
•
Ross Part Number: 4800DR-345-02
•
Release Date: July, 2010. Printed in Canada
The information contained in this document is subject to change without notice or
obligation.
Copyright
©
2010 Ross Video Limited. All rights reserved.
Contents of this publication may not be reproduced in any form without the
written permission of Ross Video Limited. Reproduction or reverse engineering of
copyrighted software is prohibited.
Patents
This product is protected by the following US Patents: 4,205,346; 5,115,314;
5,280,346; 5,561,404; 7,034,886; 7,508,455. This product is protected by the
following Canadian Patents: 2039277; 1237518; 1127289. Other patents pending.
Notice
The material in this document is furnished for informational use only. It is subject to
change without notice and should not be construed as commitment by Ross Video
Limited. Ross Video Limited assumes no responsibility or liability for errors or
inaccuracies that may appear in this document.
Trademarks
•
®
is a registered trademark of Ross Video Limited.
•
Ross, ROSS, ROSS
®
, MLE, Vision, Octane, Squeeze & Tease, Squeeze
& Tease WARP, OverDrive, RossGear, openGear, DashBoard Control
System, and SoftMetal are registered and unregistered trademarks of Ross
Video Limited.
•
Windows is a registered trademark of Microsoft Corporation in the United
States and other countries.
•
All other product names and any registered and unregistered trademarks
mentioned in this document are used for identification purposes only and
remain the exclusive property of their respective owners.
Important Regulatory and Safety Notices to Service
Personnel
Before using this product and any associated equipment, refer to the "Important
Safety Instructions" listed in the front of your Engineering Manual to avoid
personnel injury and to prevent product damage.