Ross 4500DR-104-07 Скачать руководство пользователя страница 78 | Manualshive

Страница: 78 / 161

Ross 4500DR-104-07 Скачать руководство пользователя страница 78

78 • Front Panel Menu System

SRG-4500 User Guide (v7.0)

System Report

Figure 7.21

provides an example of the System Report menu.

Figure 7.21 System Report Menu Example

The System Report provides complete version information for the hardware, firmware and software elements that

make up the SRG-4500.

192.xxx.xxx.xxx

This field reports the user programmed Ethernet IP Address of the SRG-4500. The options in the sub-fields appear

as: 0 through 255.

Ethernet

This field reports the detailed Ethernet link status of the SRG-4500. The options in the first sub-field appear as:

<blank>, 10Mbps, or 100Mbps.
The options in the second sub-field appear as: No link, Full Duplex, or Half Duplex.
Additionally, the current Ethernet link status is reported on the bottom line of the Logo or Time stand-by menus on

the Front Panel Display.

ArmFile

The Arm File menu link is in the form: “

ArmFile_0x00200000_vxx_xxx.ata

”

.

The sub-field “0x00200000” is the load address. The sub-field “vxx_xxx” is the version number.
Updates of this file may be uploaded via the Ethernet interface. Refer to the section “

Software Upgrades

page 95 for details.

XilFile

The Xilinx File menu line is in the form: “

XilFile_0x30000000_v00_21x.ata

”

The sub-field “0x30000000” is the load address. The sub-field “v00_21x” is the version number.
Updates of this file may be uploaded via the Ethernet interface. Refer to the section “

Software Upgrades

page 95 for details.

PatFile

The Pattern File menu line is in the form: “

PatFile_0x34000000_vxx_xxx.ata

”

.

The sub-field “0x34000000” is the load address. The sub-field “vxx_xxx” is the version number.
Updates of this file may be uploaded via the Ethernet interface. Refer to the section “

Software Upgrades

page 95 for details.

12April 2013

XilFile_0x30000000_vxx_xxx.ata
PatFile_0x34000000_vxx_xxx.ata
LogFile---------- none present
BMPFile---------- none present

ArmFile_0x00200000_vxx_xxx.ata

AudFile---------- none present
Bootware vxxxxxx Software vxxxxx
Hardware vxxxx Firmware vxxxx

Ethernet

100Mbps

Full Duplex

«
...
76
77
78
79
80
...
»

Содержание 4500DR-104-07


































































































































































Отзывы:

Нет отзывов