QUICK TIPS
For the latest in FAQ and tips go to
https://www.rosinbomb.com/pages/operationtips.
• Make sure to set your M60 heat controllers (both upper and lower
plates) to the same temperature for the most efficient heat usage
during press.
• Allow the plates to pre-heat for approximately 10 minutes to
ensure your press is done at the correct temperature.
• Create multiple pucks and bags to press “Bottle Tech Style.” This
will allow you the fastest and most efficient production process.
Bottle Tech style is achieved by inverting the corners, then
overlapping the corners so that your bag stands up vertically on
the lower press plate. Once the bag is loaded with your puck, you
will fold down the top portion of the bag like a present and you are
ready to press.
• Allow rosin to flow unimpeded from the channel into the collection
tray. Do not inhibit the flow of rosin or come in contact with the
plates during the press.
• Allow the collection tray to cool a minimum of 5 minutes
after you’ve pressed your material. This will allow for easier
manipulation of the rosin. Cooling times vary based on ambient
temperature.
• Once your press day is complete, allow the plates to come to
ambient temperature before cleaning. Simply wipe clean the
channel and plates using ROSINBOMB’s cleaning tool once they
are at safe temperature.
page 10