background image

3 GB

  INDUCTION

USE PROCEDURE

An electronic generator powers a coil located inside the appliance.
This coil creates a magnetic field, so that when the pan is placed
on the hob, it is permeated by the induction currents.
These currents make the pan into a real heat transmitter,
while the glass ceramic hob remains cold.

This system is designed for use with magnetic-bottomed
pans.

Put simply, induction technology has two main advantages :

- as heat is emitted only by the pan, heat is maintained at its

maximum level and cooking takes place without any heat loss.

- There is no thermal inertia, as cooking automatically starts when

the pan is placed on the hob and stops when it is removed.

•  Protection from over-Temperature

A  sensor monito

r

s  the  temperature in the cooking  zones.

Control unit

The following information will help you select the pans best adapted
to obtain good results.

  HOB COOKWARE ADVICE

Always use good quality cookware with perfectly flat and
thick bases : 

using this type of cookware will prevent hot spots

that cause food to stick. Thick metal pots and pans will provide
an even distribution of heat.

• Ensure that the base of the pot or pan is dry : 

when filling

pans with liquid or using one that has been stored in the
refrigerator, ensure that the base of the pan is completely dry
before placing it on the hob. This will help to avoid staining the hob.

Using good quality cookware is critical for setting the best

performance from your hob.

When the temperature exceeds a safe level.the cooking zone
is automatically switched off.

• Residual heat warning

When the hob has been operating for some time,there will be

away from it.

• Auto shutdown

Another safety feature of the induction  hob is auto shutdown.
This occurs whenever you forget to switch off a cooking zone.
The default shutdown times are shown in the table below.

When the pan is removed from the  cooking zone,  it stops
heating immediately and switches itself off after the buzzer
sounded for one minute.

some residual heat.The letter"H"appears to warn you to keep

A HIGH SAFETY APPLIANCE

the guidance of the doctor.

RE

shall use this product under

The patient with a heart pace

N D :

mak er 

M I

Oem[h b[l[b

R^[ ^[Wj_d] ped[ i^kj Zemd

WkjecWj_YWbbo W\j[h

6q:

;q65

66q69

= ^ekhi
9 ^ekhi
7 ^ekhi

6:

6^ekhi

LTYV^ReZT UZRXcR^ `W eYV T`_ec`] aR_V]

1. Power regular key
2. Timer regular key

5. Memory

3. Booster

4. Special function

6. Lock
7. On/Off

1

2

3

4

5

6

7

1

2

3

4

5

6

7

• Use pans whose diameter is as large as the graphic of

 the zone selected.

Using a pot a slightly wider energy will be 

used at its maximum efficiency.If you use smaller pot efficiency
could be less than expected.Pot less than 140 mm could be 
undetected by the hob.

RBI647 / RCI647IN / RBI647MM

RBI637 / RCI637IN / RBI637MM / RBI4637

Содержание RBI4637
















Отзывы: