Removing the oven door
To make it easier to clear the oven, the door may be
removed.
Hinge with mobile U-bolts (Fig. 4)
The hinges "A" are fitted with two mobile U-bolts "B"
which block the door when it is completely open if they
are hooked onto sections "C" of the hinges. After this
has been done, the door must be lifted up and taken out.
When carrying out this operation, hold the sides of the
oven door beside the hinges.
To refit the door first slide the hinges into their grooves.
Lastly, before closing the door do not forget to detach
the two mobile U-bolts "B" which were used to hook
the two hinges.
Fig. 4
Fig. 3
Oven door
Clean the oven do or using non-abrasive products.
The glass panel can be easily removed and
cleaned by unscrewing the four screws at the side
(fig. 3 ).
Fig. 5
Replacing the bulb (fig. 5)
CAUTION: disconnect the oven power supply
cable.
If you have to replace the bulb B, remove the
protective cover A by turning it anticlockwise.
After replacing the bulb, refit the protective cover
A.
10
