Rosewill WIRELESS N ADAPTER RNX-N150UBE Скачать руководство пользователя страница 2

Страница: 2 / 26

Wireless N Adapter

RNX-N150UBE User Manual

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device

and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations.

The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all

persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user

may be required to take adequate measures.

National Restrictions

2400.0-2483.5 MHz

Country Restriction

Reason/remark

Bulgaria

General authorization required for outdoor use and public service

France

Outdoor use limited to 10 mW

e.i.r.p. within the band 2454-2483.5

MHz

Military Radiolocation use. Refarming of the 2.4 GHz band has

been ongoing in recent years to allow current relaxed regulation.

Full implementation planned 2012

Italy

If used outside of own premises, general authorization is

Содержание WIRELESS N ADAPTER RNX-N150UBE



























Результаты поиска

Содержание WIRELESS N ADAPTER RNX-N150UBE

Отзывы:

Бренды по названию

Популярные бренды

Rosewill WIRELESS N ADAPTER RNX-N150UBE, Руководство пользователя

Результаты поиска

Содержание WIRELESS N ADAPTER RNX-N150UBE

Отзывы:

Бренды по названию

Популярные бренды