T600N - Wireless Dual Band Gigabit Router
THIS IS SECOND PAGE, PLEASE START FROM PAGE ONE FIRST
T600N - Wireless Dual Band Gigabit Router
THIS IS SECOND PAGE, PLEASE START FROM PAGE ONE FIRST
Support: [email protected]
Call Center: (800) 575-9885
Web: http://www.rosewill.com
QUICK SETUP GUIDE
Wizard Setup Guide – Wireless Setup
F
8
9
Setup Wizard
►
After click twice on “
Next
” confirming to start on the Wizard setup process, T600N will automatically
detect your Connection from the ISP. You will need to provide T600N the following information once
the connecting method was detected.
►
T600N is able to detect Static IP, Dynamic IP, PPP over Ethernet, PPTP, and L2TP connection methods.
•
PPPoE
: PPPoE requires you having the User Name and Password provided by your ISP. Normally
happens when using DSL connection.
•
Dynamic IP (DHCP)
: DHCP does not require entering anything. Usually happens when getting
connection from an existing internet Connection.
•
Static IP (Fixed)
: Fixed requires you entering a set IP address, Subnet Mask, Gateway IP Address,
Primary DNS, and/or Secondary DNS. These information will provided by your ISP and normally
happens when using Cable connection.
•
Manually Configuration
: If no WAN Connection was detected, you will need to manually enter the
necessary information to connect to your ISP. You may want to check the cable connection and Rescan.
Setup Wizard Guide
►
Once the setup for Modem to LAN complete, you will continue to set up the Wireless configuration.
►
The Wizard will start with
2.4G WLAN Configuration
, then
5G WLAN Configuration
:
•
2.4G WLAN Configuration
:
There are 5 levels of Wireless Encryption you can set. From the lowest security level to the highest
level’s WPA2 PSK. Please follow the instruction in the window to set you SSID and password Key.
•
5G WLAN Configuration
:
There are 5 levels of Wireless Encryption you can set. From the lowest security level to the highest
level’s WPA2 PSK. Please follow the instruction in the window to set you SSID and password Key.
5 Security Levels for Wireless Encryption
Wizard Setup Guide – Setup Successfully
G
10
Setup Wizard
►
Once the setup complete, you will see a summary
window show up tells you to
Reboot
the Router’s
System to make all changes effective.
►
The Reboot process will take 45 seconds.
►
After the Reboot process , the Status window of
the T600N will popup.
Admin Password Changes
►
When you finish the Wizard setup, please click on
“Tools”
on the left hand side’s menu to change the
default Password for login into your T600N from
“admin”
to your desired Password.
►
Please write down this password somewhere and
keep it for your future use.
►
This is very important because the default password
may be an easy access for people who wants to
hack into your network.
System is rebooting, pleasw wait seconds
45
Wizard Setup Guide – Modem to LAN Setup
E
System
Wizard
Internet
7
Setup Wizard
►
Click on
Wizard
on the menu on the left side of the screen.
►
Select “
Next
” twice to continue, T600N will Auto-Detect your Network
and guide you through a step by step in both WAN to LAN and Wireless
setting. Please see following page for Wizard details. (If your connection
was not detected here, you will need to manually complete the setup.)
Congratulations, T600N is now successfully configured, and your settings are now saved.
You may now connect other devices directly to the 4 wired ports on the back panel or connect wirelessly to T600N.