Rosewill RNX-N300X, Руководство пользователя

Страница: 23 / 37

Wireless LAN PCI Card RNX-N300X User Manual
23
WPS AP List Display the information of surrounding APs with WPS IE from
last scan result. List information includes SSID, BSSID,
Channel, ID (Device Password ID), Security-Enabled.
Rescan Click to rescan the wireless networks.
Information Display the information about WPS IE on the selected network.
List information includes Authentication Type, Encryption Type,
Config Methods, Device Password ID, Selected Registrar,
State, Version, AP Setup Locked, UUID-E and RF Bands.
PIN Code 8-digit numbers. It is required to enter PIN Code into Registrar
using PIN method. Each Network card has only one PIN Code
of Enrollee.
Config Mode Enrollee or an external Registrar.
Table of Credentials Display all of credentials got from the Registrar. List information
includes SSID, MAC Address, Authentication and Encryption
Type. If STA Enrollee, credentials are created as soon as each
WPS success. If STA Registrar, RaUI creates a new credential
with WPA2-PSK/AES/64Hex-Key and doesn't change until next
switching to STA Registrar.
Detail Information about Security and Key in the credential.
Connect Command to connect to the selected network inside
credentials.
Rotate Command connect to the next network inside credentials
Disconnect Stop WPS action and disconnect this active link. And then
select the last profile at the Profile Page of RaUI if exist. If there
is an empty profile page, the driver will select any non-secure
AP