Wireless N PCI Adapter
RNX-N250PC2 Quick Installation Guide
4
Method Two:
Without entering a key, push the WPS (other brands may call it
QSS) button on your router if prompted to
You can also connect by pushing
the button on the router
as shown below. Then click
OK
to continue.
Figure 4
b. To connect using WPS
1. Push the WPS/QSS button on the back panel of the Router.
2. Launch the config utility and click
WPS
in the tools section. Select
Push the
button on my access point or wireless router
and then click
Connect
.
Figure 5
3. Wait for the connection progress to be completed.The following screen
indicates successful connectivity. Click
OK
to finish the WPS connection.
