Rosewill RNX-AC1200UB Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 41

Rosewill RNX-AC1200UB Скачать руководство пользователя страница 2

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

•

Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:

1

）

This device may not cause harmful interference.

2

）

This device must accept any interference received, including interference that may
cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modifications to this equipment. Such modifications could void the user’s authority

to operate the equipment.

FCC RF Radiation Exposure Statement:

This  equipment  complies  with  FCC  radiation  exposure  limits  set forth for  an  uncontrolled
environment.  End  users  must follow  the  specific  operating  instructions  for  satisfying  RF
exposure compliance. This transmitter must not be co-located or operating in conjunction with
any  other  antenna  or  transmitter. This  equipment  has  been  SAR-evaluated  for  use  in  hand.
SAR  measurements  are  based  on  a  5mm  spacing  from  the  body  and  that compliance  is
achieved at that distance.

I

«
1
2
3
4
...
»

Содержание RNX-AC1200UB










































Отзывы:

Нет отзывов