3
User Manual
USB 2.0 To IDE Cable For 2.5"/3.5"/5.25" Drive With Power Adapter RCW604
2. Connect the power adapter set.
3. Plug the 4 pin power adapter to your ATA/ATAPI device
(There is no additional power needed for 2.5” HD)
4. Plug the power adapter to power source and turn on the power .
(Please make sure the voltage is between 00~240V)
5. Plug the USB2.0 cable to PC and wait for PC auto-detection.
Driver is needed only in old system such as Windows 98.
Please inset the driver disk when your system can’t complete
the installation process. Windows will auto-install after it detects
the driver disk and choose the most suitable driver for your system.
(Please notice the direction of USB port)
