SATA II/ATA 133 PCIe Card
RC216
User Manual
15
make this floppy disk, copy the contents of the
“
RC-216\Floppy32
”
folder, found on the driver CD, onto a blank floppy disk then follow the
directions below.
1.
Setup the RAID Array prior to Windows installation.
2.
Follow Microsoft’s Windows installation procedure.
3.
Restart the computer when prompted by Windows’ installation.
4.
At the Windows Setup screen, press
Load Driver
to install the
RAID driver.
5.
Insert the floppy disk, please select
JMicron JMB36X Controller
(A:\jraid_f.inf)
, then press
Next
. (Change
A:\
to match your floppy
drive letter)
6.
Follow the on-screen instructions to complete the Windows
installation.
For An Existing Installation
1.
Setup the RAID Array prior to driver installation and boot up to
Windows.
2.
At the
Found New Hardware Wizard
window pop-up, please click
Cancel
button to cancel the driver installation for the device at this
moment. The driver for this device will be installed in the next step.
3.
Please insert the CD driver bound with PCIe SATA II 300 + PATA
Raid Card into your CD-ROM Drive.
4.
At the Windows desktop, click
Start
, then
Run
.
