PARALLEL PCI Express CARD1 Port
RC-302E User Manual
2
Hardware Installation
1.
Turn Off the power to your computer.
2.
Unplug the power cord and remove your computer’s cover.
3.
Remove the slot bracket from an available PCIe slot.
4.
To install the card, carefully align the card’s bus connector with the selected PCIe slot on
the motherboard. Push the board down firmly.
5.
Replace the slot bracket’s holding screw to secure the card.
6.
Replace the computer cover and reconnect the power cord.
Driver Installation
For Windows® 2000
1.
Insert the Driver CD into the CD-ROM drive.
2. At
the
Found New Hardware Wizard
, click
Next
.
3. Select
Search for a suitable driver for my device (recommended)
, and click
Next
.
4. Check
CD-ROM drives
, uncheck the other boxes, then click
Next
.
5. Click
Next
.
6. Click
Finish
to complete the driver installation.
For Windows® XP/Server 2003/XP-x64/Server 2003-x64
1.
Insert the Driver CD into the CD-ROM drive.
2. At
the
Found New Hardware Wizard
, select
Install the software automatically
(Recommended)
, then click
Next
.
