11
HEROS-titan AS – Rosenbauer
EN
IMPORTANT: Protection of the visor is only provided in the final position (end locking,
no intermediate position).
IMPORTANT: The eye protector (optional) should be moved only by using both levers
(left and right) smoothly. Otherwise the visors can be scratch-damaged.
These kinds of damages are NO warranty claim!
2.3 Doffing your protective helmet
a) Helmet is not contaminated after use:
∙
Remove the helmet in reverse order from that described above for donning the
helmet.
∙
Inspect each item of the helmet assembly for any damage or change in
condition.
∙
Any damage or change in condition must be corrected before the helmet is
used again.
∙
Clean and store the helmet as recommended under „Maintenance“.
b) Helmet is contaminated after use:
Protective helmets contaminated with blood, bodily fluids, toxins, radioactivity,
chemicals, and hazardous materials.
Strictly avoid unprotected bodily contact with any contaminated area of your
helmet assembly.
Avoid spreading the contaminants from your helmet assembly to your
personal belongings, your living quarters and/or interior spaces in buildings
and vehicles.
Place contaminated helmet assembly in a sealable, leak-proof, air tight bag.
Dispose of in accordance with applicable federal, state and local laws.
If the helmet is to be reused, it must be decontaminated by a decontamination
professional in accordance with applicable federal, state and local laws.
2.4 Cleaning
∙
You must keep your protective helmet assembly clean
∙
Clean the helmet assembly after each use, but before inspection
∙
NEVER use a helmet that is not thoroughly cleaned and dried
∙
Clean the
helmet shell, the visors and all plastic parts with warm water and mild
detergent using a soft sponge or cloth
NEVER clean any part of the helmet or visor with abrasives, solvents, petrol,
acids, etc., as this can have negative effects on the protective function.
150509_VWI_HEROS-titan AS (Australien)_EN.indd 11
31.10.17 09:22
