RADIO OPERATION
03
RADIO OPERATION
2 DIN DVD PLAYER
6.5" WIDE SCREEN MONITOR
2 DIN DVD PLAYER
6.5" WIDE SCREEN MONITOR
04
DVD
CDC
O
SECURITY CODE
TV MEM
M
T
ZOOM
REPEAT
LOCATE
OPTION
VIEW
CANCEL
WIDE
ENT
1
2
3
4
5
6
7
23
9
10
11
12
13
14
15
16
1
Infra-red receiver and security indicator
2
ON/OFF
3
MUTE
4
VOLUME UP
5
SETTINGS MODE Bass, Treble, Speaker, Color, Brightness, Tint, Nav Audio
6
VOLUME DOWN
7
JOYSTICK
Manual / Seek Tuning
9
LOC
Local / Distance Selector
10
ASM
Automatic Station Memory
11
PRESET MEMORY 6
12
PRESET MEMORY 5
13
PRESET MEMORY 4
14
PRESET MEMORY 3
15
PRESET MEMORY 2
16
PRESET MEMORY 1
23
AM/FM RADIO select
Selecting waveband
By sequentially pressing the
AM FM
button, two FM bands (FM1 & FM2) and one AM band
can be selected. The chosen band and the frequencies stored in the Memory Presets will
be confirmed on the display.
Manual Tuning
Pressing the
JOYSTICK
up will increase the tuning frequency and pressing down will
decrease the tuning frequency.
The radio will tune in steps of 9 KHz for AM and 0.1 MHz for FM.
If the button is kept depressed, the frequency will increase or decrease at a fast rate until
the button is released.
Seek Tuning
This function seeks radio stations automatically.
Pressing the right hand side of the
JOYSTICK
will automatically select the next higher
frequency radio station, and pressing the left hand side of the
JOYSTICK
will automatically
select the next lower frequency radio station.
As the radio can seek weak and noisy distant radio stations, it is recommended to switch
the multi function button 8 below "LOC" to the Local On position. This limits the seek tuning
to stronger local radio stations only. "LOC" will be indicated on the display. For more
information on LOCAL refer to "Local / Distance Selector" section of handbook.
Radio Memory Presets
Briefly pressing one of the multi function buttons 1 to 6 (presets), will recall the radio station
frequency which has been stored into that particular preset. The corresponding button
number will be highlighted on the display.
18 radio station frequencies (6 for AM, 6 for FM1 and 6 for FM2) can be stored into the 6
preset buttons.
PLEASE NOTE:
IF the ASM function is initiated, the previously stored frequencies will be
replaced. Refer to "Automatic Radio Station Memory" section of this manual
How to store radio stations into presets
Select the desired waveband, AM, FM1 or FM2 using the AM FM Waveband selector button.
Tune in the desired radio station using the
JOYSTICK
.
Press and hold any one of the multi function buttons 1 - 6. After 2 seconds the audio will
briefly mute, indicating that the chosen radio station is stored into the preset.
The number of the corresponding button and the selected frequency will be shown on the
display.
Repeat the same procedure for the other five preset buttons. Each of the six presets allows
the storage of a radio station in AM, FM1 & FM2.
To override a previously stored radio station, repeat the above procedure.
