Installation Guide Toyota Prius
Rosen Entertainment Systems
Copyright 2010 All Rights Reserved
Installation Guide
DP-TY1074 Rev A
Page 4
Remove Factory Radio
Carefully remove factory radio and remove all harnesses
from back of radio
Remove Mounting Brackets From OEM
Radio
Remove phillips screws x4 on left and right hand side
mounting brackets
Re-install Brackets on Rosen Unit
Re-install phillips screws removed in previous step
LOCATING REMOTE COMPONENTS
You will need to mount the GPS and Optional Satellite Radio Antennas on the exterior of the vehicle.
And mount the iPod Interface Connector in the vehicle. The following steps will help guide you
through this process.
STEP
3
Use Caution around SRS Components
I
t is the
installer’s responsibility
to ensure that the safety
equipment in the vehicle is
NOT
adversely affected by installation
of this system. Ensure that the routing of the harnesses do NOT
obstruct airbags, SRS or other safety devices.
Mount the GPS and Sat Radio antenna in a
location on the exterior of the Vehicle
Route the GPS harness away from other power harnesses in the
vehicle.
This will help to ensure optimum performance of the GPS system.
CAUTION