Page 8
Rosen Aviation Displays
Release the clip features by pulling back on the hinge region
of the shroud where shown below.
With the display still in its fully-opened position, carefully lift
the shroud off of the frame assembly. Pull back with your
fingers to release the doghouse clips, and lift as shown in the
photo below. Do not stress the outer edge of the enclosure, lift
only as shown below.
WARNING! Do not force the shroud on or off the frame
assembly. This delicate piece of plastic must be handled with
extreme care.
Use the following drawings to assist in mounting the 17” Fold
Down assembly.
Note: Ensure that the connecting harness from the aircraft will
be accessible to plug into after the assembly is mounted.
Installation Guidelines
