Rosen Aviation
Remote Display System
Document Number: 105478
Revision: F
Date: 06/23/14
Template: 4.4.1.6FM2; Revision A; 12/06/12
Page 28 of 38
10.3. OSD Timeout
Use OSD Timeout to set the amount of time the menu screens and control bars are visible,
without making any changes, before they timeout and close automatically.
There are three increments: 6 Seconds, 15 Seconds, and 30 Seconds.
From the Technician Menu, press the
▼
button to select
OSD Timeout
and then
press
ENTER
.
Use the ▲▼ buttons to select a time increment and press
ENTER
.
Select
Back
and press
ENTER
to return to the Technician Menu.
Press
EXIT
to exit the OSD.
10.4. Network ID
Use this option to specify the IR and RS-485 network addresses to control multiple displays from
a single cabin management system or remote. For example, the monitor ID numbers on the
Pronto remote correspond to the Network ID.
Each display requires a unique address on the RS-485 network. Setting this address sets the
value for both interfaces. Network settings for Rosen displays are on a scale of 1 to 31.
From the Technician Menu, press the
▼
button to
select
the
Network ID
,
and then press
ENTER
to open the screen.
Use the ▲▼ buttons to select an address between 1 and 31 for the display and press
ENTER
.
Select
Back
and press
ENTER
to return to the Technician Menu.
Press
EXIT
to exit the OSD.
10.5. Splash Screen
(Available on RMEB 0700-107 when the Operation Mode is set to Standard) Use this option to
turn a splash screen on or off. The splash screen appears for approximately eight seconds when
28V power is first applied to the display.
When enabled, the Rosen Aviation splash screen appears; when disabled, the screen remains
black.
Highlight
Technician
Splash Screen
and press
ENTER
.
Use the ▲▼ buttons to set the option and then press
ENTER
.
Select
Back
and press
ENTER
to return to the Technician Menu.
Press
EXIT
to exit the OSD.
