Rosen Aviation
Document Number: 100318
Revision: A
Date: 03/11/08
Template: 4.2.3-6-FM; Revision A; 16 May, 2005
Page 4 of 13
1. INTRODUCTION
The Headphone Distribution Amplifier 0700-001 features three audio inputs, a pilot mic input, and
eight controllable audio outputs. The pilot mic input will override the other inputs when active. The
unit is designed to integrate into any entertainment system with analog audio capability and
controllers that allow you to select different audio sources in the aircraft.
This guide describes general configuration information for the Rosen Headphone Distribution
Amplifier with any audio source equipment to supplement the Outline and Installation Drawing (P/N
0700-001-CD
).
Note:
Only trained and qualified personnel should perform installation and service.
1.1. Unpacking
The following parts are shipped with the Headphone Distribution Amplifier
Outline and Installation Drawing (P/N
0700-001-CD
)
Headphone Distribution Amplifier (P/N
100312
)
Headphone Distribution Amplifier CD (P/N
101156
)
The
Outline & Installation
drawings are also available at
From the
Support
Drawings and Pinouts
, and look for
the product name under the Accessories category.
2. DEFINITIONS
Independent
channels
All eight outputs, or channels, operate independently.
Source select
A switch that enables you to select between three different audio input
sources independently.
Output channel
An audio output from the Headphone Distribution Amplifier (outputs 1-8).
Input channel
Refers to the line-level audio source (inputs channels A, B, and C. For
example, a DVD player, iPod, and RosenView VX.