background image

Reference Manual 

00809-0100-4708, Rev AA
June 2010

3-1

Rosemount 708

Section 3

Mounting

Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-1
Mounting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-2
Direct Mount  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-2
Ground the Transmitter  . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-5

SAFETY MESSAGES

Instructions and procedures in this section may require special precautions to 
ensure the safety of the personnel performing the operations. Information that 
potentially raises safety issues is indicated by a warning symbol ( ). Please 
refer to the following safety messages before performing an operation 
preceded by this symbol.

Warnings

Failure to follow these installation guidelines could result in death or serious injury

:

 

Only qualified personnel should perform the installation

Explosions could result in death or serious injury.

Before connecting a Field Communicator in an explosive atmosphere, make 
sure that the instruments are installed in accordance with intrinsically safe or 
non-incendive field wiring practices

Verify that the operating atmosphere of the transmitter is consistent with the 
appropriate hazardous locations certifications

Electrical shock could cause death or serious injury.

Use extreme caution when making contact with the leads and terminals

This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following conditions: This device may not cause harmful interference. This device must 
accept any interference received, including interference that may cause undesired 
operation.

This device must be installed to ensure a minimum antenna separation distance of 20 
cm from all persons.

Содержание 708













































Отзывы: