Rosemount 6888Xi Скачать руководство пользователя страница 78

Страница: 78 / 114

Configuration, Startup and Operation

Section 3: Configuration, Startup and Operation

Reference Manual

January 2019

00809-0100-4892

ENTER when ready to start.

Follow the prompts on the 6888Xi display to perform the trim.

Use the RIGHT and LEFT arrow keys to select the digit to edit, then the UP and DOWN arrow

keys to change the value of the digit. Press ENTER to save the new value. Press ENTER to

accept the change.

When complete, press EXIT to return to the ANALOG OUTPUT menu.

10. Repeat steps 1 through 9 for PROBE 2 if configured for dual channel.

D/A Trim with 6888Xi and Field Communicator

Use the 375/475 Field Communicator to access the main HART menu.

From the main menu, select SERVICE TOOLS.

From the SERVICE TOOLS menu, select MAINTENANCE.

From the MAINTENANCE menu, select ANALOG OUTPUT.

From the ANALOG OUTPUT menu, select TRIM mA OUTPUT.

In the first screen, a “Loop should be removed from automatic control” warning occurs.

Remove the 6888Xi from any automatic controls loops to avoid a potentially dangerous

operating condition. Press OK when ready.

Follow the prompts on the 6888Xi display to perform the trim.

Use the stylus on the screen to enter the new measured analog output value then press

ENTER to accept.

When trim is complete, press OK to return to the ANALOG OUTPUT menu.

Содержание 6888Xi



















































































































Результаты поиска

Содержание 6888Xi

Отзывы:

Rosemount 6888Xi, Справочное руководство, Страница: 78 / 114

Результаты поиска

Содержание 6888Xi

Отзывы: