Rosemount 5300 Series, Справочное руководство

Страница: 103 / 432

89
Reference Manual
00809-0100-4530, Rev DD
Configuration
May 2016
Configuration
For the different tank connections the Upper Reference Point is located at the underside of
the threaded adapter or at the underside of the welded flange, as illustrated in
Figure 5-5 :
Figure 5-5. Upper Reference Point
Tank height
The Tank Height is defined as the distance from the upper reference point to the lower
reference point. The transmitter measures the distance to the product surface and
subtracts this value from the Tank Height to determine the product level. The lower
reference point can be set to any position in the tank simply by adjusting the Tank Height.
Mounting type
Enter the type of mounting for the device. This configuration optimizes the device for the
respective mounting type.

Unknown – default factory setting for mounting type, and can also be used if the
mounting type is unknown

Pipe/chamber – select this option if the device is mounted on a chamber/bridle or
in a pipe. When selecting this alternative enter the corresponding Inner diameter as
well

Nozzle – select this if the device is installed on a nozzle. When selecting this
alternative, configure the Inner diameter and the nozzle height as well

Direct/bracket – when the device is mounted directly on the tank roof with no
traditional nozzle, this is the alternative to use. With this selection no inner
diameter or height is required, thus those selections are disabled
Inner diameter
Used with pipe, chamber, and nozzle installations
Nozzle height
For nozzle installations
Total Probe Length
NPT BSP/G Flange
Upper Reference Point
Tri Clamp
Adapter