background image

LIMITED WARRANTY 

Copyright 

 Rose Electronics 2008. All rights reserved. 

No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any means, electronic or 
mechanical, including photocopying and recording, without the prior written permission of Rose Electronics. 
 
Rose Electronics Part # MAN-UMR2  
Printed In the United States of America 

„

 Revision 1.2

 

 
Rose Electronics warrants the UltraMatrix™ Remote 2 to be in good working order for one year from the date of 
purchase from Rose Electronics or an authorized dealer. Should this product fail to be in good working order at any 
time during this one-year warranty period, Rose Electronics will, at its option, repair or replace the Unit as set forth 
below. Repair parts and replacement units will be either reconditioned or new. All replaced parts become the property 
of Rose Electronics. This limited warranty does not include service to repair damage to the Unit resulting from 
accident, disaster, abuse, or unauthorized modification of the Unit, including static discharge and power surges. 
 
Limited Warranty service may be obtained by delivering this unit during the one-year warranty period to Rose 
Electronics or an authorized repair center providing a proof of purchase date. If this Unit is delivered by mail, you agree 
to insure the Unit or assume the risk of loss or damage in transit, to prepay shipping charges to the warranty service 
location, and to use the original shipping container or its equivalent. You must call for a return authorization number 
first. Under no circumstances will a unit be accepted without a return authorization number. Contact an authorized 
repair center or Rose Electronics for further information.  
 
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO A PERIOD 
OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, 
WILL APPLY AFTER THIS PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED 
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.  
 
IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTED ABOVE, YOUR SOLE REMEDY SHALL 
BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL ROSE ELECTRONICS BE LIABLE 
TO YOU FOR ANY DAMAGES INCLUDING ANY LOST PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR 
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR THE INABILITY TO USE SUCH PRODUCT, 
EVEN IF ROSE ELECTRONICS OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF 
SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.  
 
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 
DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY TO YOU. THIS WARRANTY GIVES 
YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE 
TO STATE. 
 
 
 
 
 
 
 
 
 
IBM ®, AT, and PS/2 are trademarks of International Business Machines Corp.  
Microsoft ® and Microsoft Windows™ are registered trademarks of Microsoft Corp.   
Apple, Macintosh, and ADB are trademarks of Apple Computer, Inc. 
Sun is a registered trademark of Sun Microsystems Inc. 
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owner. 
 
 
 
 
 
 
 
 
 
 
 

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference when the equipment is operated in a commercial environment. This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful interference in which case the 
user will be required to correct the interference at his own expense. 

Содержание UltraMatrix Remote 2







































































Отзывы: