Operating the UltraMatrix A/V 16x32
The UltraMatrix A/V can be operated via:
RS-232 serial command inputs or using the provided RoseControl Windows
®
based software
Rose Control Windows-based software control
The UltraMatrix A/V can be easily switched using the included Rose Control software.
Install the software on a computer or laptop that will be used to switch the UltraMatrix A/V.
When the installation is complete, execute the program “RoseControl” from the “Start” menu and
the below window will display.
Router Count:
Set to the number of routers connected to the computer
Advanced Configuration:
Used when two conditions are true: 1) There is more than one
router being used, and 2) all the inputs are NOT looped from
router to router. In other words, if there are more than 16
different inputs to control, you will need the advanced
configuration.
Reset Advanced Configuration:
Returns the advanced settings to their default numbers.
Router Type:
Select the type of router that is connected at this Frame
Address
The Frame Address is the selectable number on the router's
front panel
The Frame Address is displayed to the left of the Router Type
in the Configuration Window
A/V Split:
This feature will be in future designs.
Inputs:
Enter the number of physical inputs on the back of the router.
Outputs:
Enter the number of physical outputs on the back of the
router.
Comm Port
The port number on the back of the computer that connects to
the router(s).
Timeout
Set how many seconds the program will wait for the router to
respond to commands. Can be in entered in hundredths of a
second. Example: 2.5 will wait 2 and 1/2 seconds. If 0 is
entered, the router will not wait for a response, and therefore
will not display any errors that may happen.
