Rose electronics UltraMatix AV DVI, Инструкция по установке и эксплуатации, Страница: 10 / 20

OPERATION
6 ULTRAMATRIX AV DVI INSTALLATION AND OPERATIONS MANUAL
Operation
The UltraMatrix AV DVI can be controlled using either the front panel or the RoseControl software.
Front Panel Control
Figure 3. Front Panel Buttons
NOTE: To lock the front panel buttons to avoid any accidental changes, press ESC + MENU + ENTER +
SWITCH at the same time. The display will indicate that it is locked. Repeat the procedure to unlock the front
panel.
During normal operation, you will see a list of ports on the front panel display:
Figure 4. UltraMatrix AV DVI Default Display
To assign an output to an input, press SWITCH. A blinking block cursor will appear. Use UP and DOWN to
select the input that you would like to assign. Once the cursor is over the desired input port, press ENTER to
enter editing mode. Press UP and DOWN to select the output port. Once you have selected an output, press
ENTER to save the configuration. To escape from editing mode, press ESC.