Rose electronics RS150B, Руководство пользователя

Страница: 22 / 53

- 42 - - 43 -
2-2-2-4. HDMI Passthrough
• When you activate it, HD audio formats such as surround music files bypass audio receiver via
HDMI without decoding.
2-2-2-5. OUTPUT Gain
• This is the menu to adjust the gain value of digital output. If distortion occurs when connecting
with an external receiver or DAC, adjust the Output Gain value accordingly.
2-2-3. Digital
• You can set AES/EBU OUT, I2S OUT(RJ45), I2S OUT(DVI), OPT OUT, and COAX OUT.
• If you select the Digital setting icon, the Digital output setting screen appears as follows.
2-2-3-1. MQA Type
• This is the menu to set the MQA playback mode. You can select Authenticator or Decoder mode.
Only original sound or decoded audio data can be exported to digital output; full-decoded audio
data cannot be exported.
2-2-3-2. I2S OUT(DVI)
• This is the menu to set the I2S signal output. Select the appropriate mode for the I2S input port
you are using by referring to the pin layout of A and B mode.
2-2-3-3. PCM Resampling Frequency
• This is the menu to set the sampling frequency. Select Original Sampling Rate if you want to
output the original sound or select the desired sampling rate (44.1kHz, 48kHz, 88.2kHz, 96kHz,
176.4kHz, or 192kHz) to use the re-sampling function.
2-2-3-4. DSD Mode
• Select the transmission format (Native, DOP, PCM) of audio samples to be delivered to the DAC
when playing DSD music files.
• In Native mode, analog output supports up to DSD512 when playing DSD, but digital output does
not produce sound.
• In the case of DOP mode, no sound is produced through analog output, and audio data is
transmitted up to DSD256 through digital output. For Optical and COAX, it supports up to DSD64.
• The DSD to PCM mode supports up to DSD128 and sounds simultaneously from digital and
analog outputs.