Rose electronics RackView RVR-LCDA17-4K, Инструкция по установке и эксплуатации

Страница: 13 / 30

RackView LCD Panel Manual
8
Installation Steps for RackView LCD Panel - 21"
Step 1
Mount the rear bracket with an M6 screw set.
8 x M6 screw set are required.
(M6 screw sets are not provided).
Step 2
Insert the upper part of the RackView
display panel into the rear bracket.
Step 3
Push the lower part of the RackView
display panel into the rear bracket.
Step 4
Fix the RackView display panel into the rear
bracket with two fasteners (Left & right side).
Lock the RackView display panel by the
latch (on the bottom left & right side ).
Figure 4. Installation steps for mounting the RackView LCD panels