Rose electronics Orion X OXC-08-GBIC/8FM Скачать руководство пользователя страница 119

Страница: 119 / 140

Orion X Installation and Operations Manual

111

Trace Function

All events, e.g. activities and switching operations of the Orion X matrix, are logged and displayed in this

screen. This function is used for diagnostic purposes. This screen can only be accessed from the OSD.

The following information is shown in this menu:

Field

Description

Date

Date stamp

Time

Time stamp

Message

Detailed description of the event

Trace Options



Select

Status > Trace IO Board

in the main menu to check the events on the current I/O board.



Select

Status > Trace Matrix

to check the matrix events.

Syslog Monitoring

Logging of the Orion X matrix activities, including switching operations and the performance of function critical

components like fans or power supply units, is done in this screen. It can only be accessed from the Java Tool.

To start Syslog Monitoring proceed as follows.



Select the

Matrix->Monitoring

in the menu bar, or click the Monitoring icon in the tool bar.

Figure 101. Syslog Monitoring with the Java Tool

The logging of system activities starts when the

Monitoring

menu is opened, and remains active until the tab

is closed.

Note:

Syslog messages are transmitted by UDP. This uses port 514, which should not be blocked by a firewall.

During logging, the activities are written continuously into logging files and stored locally. This logging process

includes a number of options as described below.

Содержание Orion X OXC-08-GBIC/8FM













































































































































Результаты поиска

Содержание Orion X OXC-08-GBIC/8FM

Отзывы:

Похожие инструкции для Orion X OXC-08-GBIC/8FM

Бренды по названию

Популярные бренды

Rose electronics Orion X OXC-08-GBIC/8FM, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Orion X OXC-08-GBIC/8FM

Отзывы:

Похожие инструкции для Orion X OXC-08-GBIC/8FM

Бренды по названию

Популярные бренды