INTRODUCTION
Vista LC DVI KVM Switch Manual
1
Disclaimer
While every precaution has been taken in the preparation of this manual, the manufacturer assumes no
responsibility for errors or omissions. Neither does the manufacturer assume any liability for damages resulting
from the use of the information contained herein. The manufacturer reserves the right to change the
specifications, functions, circuitry of the product, and manual content at any time without notice.
The manufacturer cannot accept liability for damages due to misuse of the product or other circumstances
outside the manufacturer’s control. The manufacturer will not be responsible for any loss, damage, or injury
arising directly or indirectly from the use of this product (See limited warranty).
System Introduction
Thank you for choosing the Rose Electronics Vista LC DVI KVM Switch, a compact and high performance
KVM Switch, connecting up to 12 PC’s with a DVI/USB/Audio interface.
Supporting DVI video resolutions up to 1920x1200@60Hz, the Vista LC DVI uses either
keyboard hot-keys or front panel buttons to switch between the connected PC’s. The supported keyboard and
mouse is the USB-HID type.
The instructions in this manual assume a general knowledge of computer installation procedures, familiarity
with cabling requirements, and some familiarity with DVI and USB device operation.
Features
■
DVI/USB and analog audio KVM Switch in 1U chassis
■
Supports 1920x1200 video resolution
■
12 CPU ports, with DVI-D and USB-HID interface
■
USB-HID for keyboard and mouse
■
Multiplatform for PC, server, blade server SUN and MAC
■
Port switching via front panel button and keyboard hotkeys
■
Hot pluggable switch, no software
■
Audio speaker supported
■
Supports SUN 1152x900 resolution