APPENDICES
CRYSTALVIEW MINI USB INSTALLATION AND OPERATIONS MANUAL
17
Appendix C. QUICK START GUIDE
The following procedure is designed to provide easy installation for the
CrystalView Mini USB extender.
Step 1 –
Connect the Local unit to a CPU’s video, USB, audio and serial
ports. Connect a Local monitor(s) to the Video out (HD15F)
Step 2 –
Connect the Remote unit to a USB keyboard, mouse / monitor,
audio, serial devices, and other USB devices. Video 1 port
connects to the CPU’s primary video port; Video 2 connects to
the CPU’s secondary video port. Connect the 5V power supply.
Step 3 –
Set the Video distance dip switches.
Set the Dip switch located on the bottom
of the Remote unit to the following for the
CAT5 cable distance needed:
Switch 1 Off = Video channel 1 15-75’
Switch 1 On = Video channel 1 75 – 150’
Switch 2 Off = Video channel 2 15-75’
Switch 2 On = Video channel 2 75 – 150’
Switch 1 = Video 1 – Switch 2 = Video 2
Step 4 –
Connect the Local and Remote units together with up to 150’ of
CATx cable.
NOTE: Cable length must match DIP switch settings
Step 5 –
Power up equipment
A- CPU / Local monitor
B- Remote unit
C- Remote monitor, audio and serial devices
